A couple rollergames issues

Your machine is ugly because you took bad care of it. Now what?

A couple rollergames issues

Postby coyle on Fri Apr 02, 2010 1:50 pm

My upper playfield flipper is a bit sticky and one of my pop bumpers isn't working and I'm gonna pull them apart today. Just wanted to see if any of you guys had any advice as to what to look for that might make my day a little easier. Thanks. Chris.
The night life ain't no good life, but it's my life.
coyle
 
Posts: 217
Joined: Tue Feb 16, 2010 7:29 pm
Location: my favorite chair/ Inner SE

Re: A couple rollergames issues

Postby Opto on Fri Apr 02, 2010 2:05 pm

Go ahead and pull the upper flipper apart - clean the plunger link and coil stop with rubbing alcohol. Is the coil sleeve (tan colored plastic thing that fits in the coil) all gunked up? It should be replaced - they cost .20 each.

I'd still recommend springing for the rebuild kits for both lower flippers and the upper. It's $40 well spent

http://www.pinballlife.com/index.php?p= ... parent=172

Get 1 full kit, and one "right side only" for the upper right flipper.

It'll change your life man . . . swear to god.

Before you rip the pop bumper apart, make sure the switches make contact when you push the plastic skirt down (do this with the PF up). You might put some rubbing alcohol on a business card and rub it between the contacts of that switch.

If it's not that, you may have a transistor that needs replacing - check that other crap first though.
"I hear the trunk shot on Theater Of Magic can be deadly."
User avatar
Opto
 
Posts: 1458
Joined: Tue May 19, 2009 11:44 am

Re: A couple rollergames issues

Postby eric on Fri Apr 02, 2010 2:12 pm

Before going crazy on the pop bumper make sure a wire hasn't fallen off one of the coil lugs and check the resistance of the coil (power off!).

I second Noah's advice on the flippers. Also check to make sure the return spring is working correctly and that the plunger isn't mushroomed.
eric
 
Posts: 586
Joined: Fri Oct 31, 2008 5:28 pm

Re: A couple rollergames issues

Postby coyle on Fri Apr 02, 2010 2:46 pm

Thanks guys. I'll give those things a try. Gonna drop in a flipper rebuild kit soon.
The night life ain't no good life, but it's my life.
coyle
 
Posts: 217
Joined: Tue Feb 16, 2010 7:29 pm
Location: my favorite chair/ Inner SE

Re: A couple rollergames issues

Postby Opto on Fri Apr 02, 2010 3:17 pm

One more thing on the upper flipper - make sure the bat isn't binding against the plastic bushing. You should be able to wiggle it up and down (that is up away from the playfield, and down towards the playfield). 1/8 to 1/4" of play is about right.
"I hear the trunk shot on Theater Of Magic can be deadly."
User avatar
Opto
 
Posts: 1458
Joined: Tue May 19, 2009 11:44 am

Re: A couple rollergames issues

Postby coyle on Fri Apr 02, 2010 4:48 pm

I think that the binding was the issue. Got it up and working now. Reallllllly need to rebuild that flipper. Going to buy a rebuild with the next pay check.
The night life ain't no good life, but it's my life.
coyle
 
Posts: 217
Joined: Tue Feb 16, 2010 7:29 pm
Location: my favorite chair/ Inner SE

Re: A couple rollergames issues

Postby DDT on Thu Apr 21, 2011 11:23 pm

I wonder if we can get MWM into a Trackie!!!!!!
DDT
 
Posts: 548
Joined: Sat May 24, 2008 6:56 pm

Re: A couple rollergames issues

Postby Opto on Fri Apr 22, 2011 6:07 am

It's gonna have to be Hot Pink.
"I hear the trunk shot on Theater Of Magic can be deadly."
User avatar
Opto
 
Posts: 1458
Joined: Tue May 19, 2009 11:44 am

Re: A couple rollergames issues

Postby DDT on Fri Apr 22, 2011 9:22 am

Seriously let's get him in a Trackie!!! Opto it is your mission to show him the way
DDT
 
Posts: 548
Joined: Sat May 24, 2008 6:56 pm


Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 1 guest

cron