BOP missing sound bits and wont sing

Your machine is ugly because you took bad care of it. Now what?

BOP missing sound bits and wont sing

Postby oneandasixtenth on Thu Nov 03, 2011 1:24 pm

So i replaced the rom chips with L7's ( they were L6's) (not sure what that means) i guess thats the version

still no luck , Im thinking about a new MPU ? but I don't want to drop the 250 bucks


all the systems test claim the machine is in working order .. sound and music and the lit diodes ..


any suggestions form the masters ....

another board suggested rewrighting the old ROM ... that I do not have the tools to do
I could bring it to portland if that would be less expensive ..and someone wants to fuck with it

thanks for any advise

T
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby Opto on Thu Nov 03, 2011 1:39 pm

Are the sounds there in test mode?
"I hear the trunk shot on Theater Of Magic can be deadly."
User avatar
Opto
 
Posts: 1458
Joined: Tue May 19, 2009 11:44 am

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Thu Nov 03, 2011 8:48 pm

I don't believe so , although all the sounds 1-12 in the test mode are there and working or so the machine claims .but ive never have done a sound test on a nother machine



she is missing some of the loop sounds like the moans , ive heard them a couple times , but not many

thanks opto
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby Opto on Fri Nov 04, 2011 6:51 am

Hmmmm - I know there's an "adult" and "family" mode in the settings somewhere - maybe adult mode will put the moans back.
"I hear the trunk shot on Theater Of Magic can be deadly."
User avatar
Opto
 
Posts: 1458
Joined: Tue May 19, 2009 11:44 am

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Fri Nov 04, 2011 8:20 am

OPTO you are right there are family modes those are off , and sing mode is on .. I have tried the metemorphis (sp older mac no spell check) both ways to see if there was a glitch





its either the sound board or the MPU
thats my guess

does anyone test these thing in portland before I go and sent out the sound board to NH? the thing is 250 bucks


Thanks
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby eric on Fri Nov 04, 2011 10:03 am

I'd recommend contacting Rob Anthony or Clive Jones for board repair. While I've never had any work done by them, both are very highly regarded in the pinball community for their board repairs. I'm not sure who quoted you $250 (which seems outrageous to me since you could find a fully working MPU and sound board for less) but according to Clive's site, his average fee for WPC MPU repair is $78 and the average for a pre-DSC sound board repair is $68.

Rob's site:
http://lockwhenlit.com/

Clive's site:
http://webpages.charter.net/coinopcauldron/Index.html
eric
 
Posts: 586
Joined: Fri Oct 31, 2008 5:28 pm

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Wed Nov 09, 2011 8:40 am

just sent them off (both mpu and sound board) thanks for the advise

i will let you know the outcome

T
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Sun Dec 04, 2011 10:05 pm

well Its been over a month and not a word , I emailed Rob

he said the boards were in house along with "6 Dozen" others , really ? and that he had found no issues with the boards ..but they may need further
looking over ?

WTFDTM?

i feel a little scammed , but then again I usually dont deal with Circut board guys

T
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Sun Dec 04, 2011 10:13 pm

upon a further look into his website, he was traveling around the country fixing in home , sounds like a cool job


I just wish he would hurry the fuck up

...
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Mon Feb 13, 2012 2:11 pm

Im in need of someone with a pile of WPC experiance


heres my problem with BOP

All boards checks out great , still no sing
all switch edge tested , still no sing
diodes ? replaced a couple on switches still no sing ,

rob anthony asked for me to get a guy out to look into it

any one know of that guy

thanks TJ
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm

Re: BOP missing sound bits and wont sing

Postby oneandasixtenth on Wed Feb 15, 2012 8:08 pm

pin mech? WPC

anyone ?


should I drive her up to portland to coin op

this is driving me nuts

T
oneandasixtenth
 
Posts: 70
Joined: Mon Dec 29, 2008 6:48 pm


Return to Repair and Restoration

Who is online

Users browsing this forum: No registered users and 1 guest

cron